|
Printed Teslin 1-up Card |
|
|
 |
Print Your card using the printer
of your choice on our perforated Teslin Card Sheets.
We have five sizes of 1-up sheets and 6 and 8 card
credit card sheets. EspressoID will automatically
enlarge any background image to make sure it goes
over the perforations so that you end up with a full
bleed card if so desired. You can print both the
front and back side of the sheet. If using
EspressoID, the program will prompt you to re-insert
the sheet to print the back. |
| |
|
(STEP 1) Remove the Card |
|
 |
Pull the Teslin sheet as shown to
separate the side attachment tabs. |
| |
|
(STEP 2)
Remove the Card |
|
 |
Now, peel the card out of the
sheet. The micro-perforations allow you to easily
remove the card. |
| |
|
(STEP 3) Insert the card into the Pouch |
|
 |
Place the Teslin card into a
Butterfly Pouch. |
| |
|
(STEP 4) Place in Carrier |
|
 |
Now insert the Card and Pouch
into a carrier. Always use a carrier as it will keep
your laminating rollers clean. We ship a carrier with each hundred pouches. |
| |
|
(STEP 5) Laminate |
|
 |
The Laminator should be set at
approximately 250°F. Now place the carrier into the
laminator, folded end first. Hold unto the carrier
until the rollers start pulling the carrier into the
laminator. |
| |
|
Finished Card - Front |
|
 |
Front View- You now have a
durable laminated Teslin Card. |
| |
|
Finished Card - Back |
|
 |
And the back.
|
