Remove the film from the packaging. Handle the film only by the edges.
Straighten the white film tabs.

1) Insert the Film Pack as shown by first inserting the pack at an angle.

2) Then push forward until the film pack is fully seated. Make sure that the white
     film tabs are not caught between the film pack and camera back.

3) Now swing the Film Back Door into the closed position.

4) Relatch the door by moving the Film Back Door latch back into the latched position.

                                                                          Make sure that the white
                                                                          film tabs are not caught
                                                                          between the film pack
                                                                          and camera back. back.

Before You Close the Film Back Door, Check and Make Sure That
The Film Tabs Are Not Caught Between The Film Pack And Camera Back.