SX-2 Camera with LED Display - 2 Year Warranty
Two Lens Cameras are used for Passport photography and Police booking photography. Two images are rendered on each sheet of instant film.
SpecificationsLenses: Two matched 110mm portrait quality lenses. Lenses are in focus with a camera to subject distance of 36-48 inches. Select Switch: Set this switch to 1 to make two different pictures on each sheet of film. Set at 2 to make a pair of identical pictures of one subject. Power requirements: Cameras operate off of 108-130 volts AC. Aim Light System: The cameras utilize a heads up aim light system. Press Aim and a light beam projects out the front of the camera. You tilt and/or pan the camera until the spot of light is on the chin of the subject. Your subject is properly framed at this time and all you do is press Shutter to take the picture. Light - Dark Control: You set this control to vary the brightness of the picture. This control has sixteen positions allowing you to utilize current and future instant films under a wide variety of conditions. Pull Film Reset: When you pull the film, the camera is automatically reset to take the next pictures. Memory: The camera has a non volatile memory chip and will remember the number of pictures remaining on a sheet of film indefinitely. Strobe Boost: You press and release Boost to turn the strobe boost on for the next picture. Tripod Mount: Allows mounting the camera to a desk stand or tripod. For color photographs use Polaroid Type 669, Polaroid Polacolor Pro 100, Polaroid ID Ultraviolet, or Fuji FC-100. For black and white photographs use Polaroid PolaPan 100. 

Purchase a Pedestal Below if needed.
See Die Cutters for Passport and Photo ID Cutters

DX-2 Camera with LCD Display - 3 Year Warranty
Two Lens Cameras are used for Passport photography and Police booking photography. Two images are rendered on each sheet of instant film.
SpecificationsLenses: Two matched 110mm portrait quality lenses. Lenses are in focus with a camera to subject distance of 36-48 inches. Select Switch: Set this switch to 1 to make two different pictures on each sheet of film. Set at 2 to make a pair of identical pictures of one subject. Power requirements: Cameras operate off of 108-130 volts AC. Aim Light System: The cameras utilize a heads up aim light system. Press Aim and a light beam projects out the front of the camera. You tilt and/or pan the camera until the spot of light is on the chin of the subject. Your subject is properly framed at this time and all you do is press Shutter to take the picture. Light - Dark Control: You set this control to vary the brightness of the picture. This control has sixteen positions allowing you to utilize current and future instant films under a wide variety of conditions. Pull Film Reset: When you pull the film, the camera is automatically reset to take the next pictures. Memory: The camera has a non volatile memory chip and will remember the number of pictures remaining on a sheet of film indefinitely. Strobe Boost: You press and release Boost to turn the strobe boost on for the next picture. Tripod Mount: Allows mounting the camera to a desk stand or tripod. For color photographs use Polaroid Type 669, Polaroid Polacolor Pro 100, Polaroid ID Ultraviolet, or Fuji FC-100. For black and white photographs use Polaroid PolaPan 100.

Purchase a Pedestal Below if needed.
See Die Cutters for Passport and Photo ID Cutters

SX-4 Camera with LED Display - 2 Year Warranty
Four Lens Cameras are used to make ID card pictures for composite type ID Cards. Four images are rendered on each sheet of instant film.
SpecificationsLenses: Four matched 110mm portrait quality lenses. Lenses are in focus with a camera to subject distance of 40-56 inches. Select Switch: Set this switch to 1 to make four different pictures on each sheet of film. Set at 2 to make a two pairs of identical pictures of two different subjects on each sheet of film. Set at 4 to make four identical pictures of one subject. The select switch setting can be changed at any time without double exposing any pictures. Power requirements: Cameras operate off of 108-130 volts AC. Aim Light System: The cameras utilize a heads up aim light system. Press Aim and a light beam projects out the front of the camera. You tilt and/or pan the camera until the spot of light is on the chin of the subject. Your subject is properly framed at this time and all you do is press Shutter to take the picture. Light - Dark Control: You set this control to vary the brightness of the picture. This control has sixteen positions allowing you to utilize current and future instant films under a wide variety of conditions. Pull Film Reset: When you pull the film, the camera is automatically reset to take the next pictures. Memory: The camera has a non volatile memory chip and will remember the number of pictures remaining on a sheet of film indefinitely. Strobe Boost: You press and release Boost to turn the strobe boost on for the next picture. Tripod Mount: Allows mounting the camera to a desk stand or tripod. Camera Back: The camera has a Polaroid CB-103 film back with the Pro Film Roller assembly. Film Types: For color photographs use Polaroid Type 669, Polaroid Polacolor Pro 100, Polaroid ID Ultraviolet, or Fuji FC-100. For black and white photographs use Polaroid PolaPan 100.

Purchase a Pedestal Below if needed.
See Die Cutters for Passport and Photo ID Cutters

DX-4 Camera with LCD Display - 3  Year Warranty
Four Lens Cameras are used to make ID card pictures for composite type ID Cards. Four images are rendered on each sheet of instant film.
SpecificationsLenses: Four matched 110mm portrait quality lenses. Lenses are in focus with a camera to subject distance of 40-56 inches. Select Switch: Set this switch to 1 to make four different pictures on each sheet of film. Set at 2 to make a two pairs of identical pictures of two different subjects on each sheet of film. Set at 4 to make four identical pictures of one subject. The select switch setting can be changed at any time without double exposing any pictures. Power requirements: Cameras operate off of 108-130 volts AC. Aim Light System: The cameras utilize a heads up aim light system. Press Aim and a light beam projects out the front of the camera. You tilt and/or pan the camera until the spot of light is on the chin of the subject. Your subject is properly framed at this time and all you do is press Shutter to take the picture. Light - Dark Control: You set this control to vary the brightness of the picture. This control has sixteen positions allowing you to utilize current and future instant films under a wide variety of conditions. Pull Film Reset: When you pull the film, the camera is automatically reset to take the next pictures. Memory: The camera has a non volatile memory chip and will remember the number of pictures remaining on a sheet of film indefinitely. Strobe Boost: You press and release Boost to turn the strobe boost on for the next picture. Tripod Mount: Allows mounting the camera to a desk stand or tripod. Camera Back: The camera has a Polaroid CB-103 film back with the Pro Film Roller assembly. Film Types: For color photographs use Polaroid Type 669, Polaroid Polacolor Pro 100, Polaroid ID Ultraviolet, or Fuji FC-100. For black and white photographs use Polaroid PolaPan 100.

Purchase a Pedestal Below if needed.
See Die Cutters for Passport and Photo ID Cutters

NP-1 Non-Power Pedestal / Desk Stand
Attach you camera to this convenient Non-Power Desk stand which allows you to pan and tilt the camera. Stand folds for compact storage.

 To complete your ID System See Laminators & Die Cutters

PP-1 Power Pedestal / Desk Stand
The PP-1 Power Pedestal includes two receptacles, one for the camera and another for your laminator. Stand folds for compact storage.

 To complete your ID System See Laminators & Die Cutters